• model-air-banner-blog
  • panzer-aces-banner-blog

Making Water Texture with vallejo products



1. Apply a small portion of Vallejo Still Water over a flat and clean surface.
2. Let it dry and then gently pill off with a blade.



3 / 4. Cut a small portion into the desired shape.



5. Glue it in place.
6. Add effects with Vallejo Water Texture.

Special effects: Step by step by José Brito



1. Heat and stretch a small portion of transparent sprue.
2. Cut it into the desired size.



3. Place it in the desired place.
4. Use Vallejo Water Texture.



5. With a small brush, place a little portion of Vallejo Water Texture around the splash.
6. The finished sea. Look at all that action!

Categories:  Auxiliary Products
Date of publication: 04/01/2010
http://www.acrylicosvallejo.com/en_US/making-water-texture-with-vallejo-products/blog/34 Making Water Texture with vallejo products

Other related posts

  • 03/29/2010

    As we know, the use of acrylic paints is nothing new to figure painting. Yet, for the last couple of years we have seen an increase in both the amount of quality work performed with them and more people that are finding out that acrylics…

    http://www.acrylicosvallejo.com/en_US/painting-figures-with-model-color/blog/1/36 Painting figures with Model Color
  • 04/12/2010

    1. The most important is to chosse the right colors to use. According the environment here our model will be placed, we must choose the correct colors to make a perfect match between model and scenario. 2. For the wet mud I just mix…

    http://www.acrylicosvallejo.com/en_US/applying-vallejo-pigments/blog/1/33 Applying Vallejo Pigments