El contenido de esta página requiere una versión más reciente de Adobe Flash Player.

Obtener Adobe Flash Player

.: Aerosol Primers

Primers in aerosol for base coat. Flamable. Solventbased, does not contain CFC or toluene.

USE GUIDE

1.Thoroughly Clean and degrease tthe object to be painted. Shake can vigorously for 1 minute after hearing mixer noise.

2.Hold can vertically, 25 cm from surface,and begin painting fast multiple thin coats to avoid runs or drips.

3.Let coating dry some 5 minutes. Clean valve by holding can upside down and spraying until only clear gas comes out.

Presentation:
Are presented in three colors: white(ref. 28010), grey (ref. 28011)
and black (ref. 28012) in bottles of 400 ml. (boxes of 12 units).

.: Surface Primer

primer acrylic uretaneSurface Primer. Ideal for surfaces like plastics, brass, resin, etc.

Acrylic-Poliurethan Primer. Apply directly without diluting with airbrush or brush. Leaves a mat, self-levelling coating of extraordinary strength and completely resistant to further manipulation, which does not leave imprints nor hide minute details. Ideal for surfaces like plastics, brass, resin, etc.

    Packaging: In 17, 60 and 200 ml. bottles.

  • White (70600, 73600, 74600)
  • Grey (70601, 73601, 74601)
  • Black (70602, 73602, 74602)
  • U.K. Bronze Green (70607, 73607, 74607)
  • U.S. Olive Drab (70608, 73608, 74608)
  • Russian Green (70609, 73609, 74609)
  • Ger. Panzer Grey / Schwargrau RAL 7021
    (70603, 73603, 74603)
  • Ger. Dark Yellow / Dunkelgelb RAL 7028
    (70604, 73604, 74604)
  • Ger. Red Brown / Rotbraun RAL 8012
    (70605, 73605, 74605)
  • Ger. Green Brown / Grünbraun RAL 8000
    (70606, 73606, 74606)
 

Aviso legal