.: Water Stone and Earth

Water Effects

A selection of water-based acrylic products designed to create rivers, lakes, canals, inlets, oceans and glaciers in models and dioramas. The products can be shaped to create waterfalls, waves, ripples and ice and can be mixed with one another, or with the colors of Model Color, Game Color or Model Air. They are applied with a brush, a painting knife, sponge or any other tool. Drying time depends on the thickness of the applied product and the humidity of the atmosphere, and can vary from 45 minutes to hours or even days.

Water Effects

Is a dense gel, perfect for shallow water on coloured grounds, and especially apt for rivulets and white water. Water Effects is available in a transparent gel and in 3 colors formulated with permanent pigments. Further variations in tonality can be achieved by blending the products with low viscosity colors like Model Air or with the Game Color Inks.The final effect also depends on the color of the ground.
Packaging: In 200 ml. pots (6,75 Fl. Oz.).


26.201 Agua Transparente	26.202 Azul Mediterraneo	26.203 Azul Pacífico	26.204 Azul Atlántico

Agua tranquilas #26.230

Is a glass clear liquid which levels it self and dries to a crystalclear film. It can be poured directly from the bottle, and will settle in the prepared space of the layout. The product is perfect for creating ponds and lakes, canals, bays and lagoons.
This product is a water-based polyurethane dispersion. When applied on a non porous surface, like glass or clear polyesters and plastics, the dried film can be peeled off and cut into the desired form.
Packaging: In 200 ml. bottles with applicator tip. (6,75 Fl. Oz.) and bottles of 35 ml. (Ref.26.235).

Foam and Snow #26.231

A high density white paste dries quickly to a hard, opaque finish. It is used to simulate foam on waves and whitecaps and is excellent for achieving White Water effects. The product can be applied straight from the bottle for simulating snow on trees and houses.
Packaging: In 32 ml. bottles with an applicator tip (1,08 Fl. Oz.).

Extra Heavy Gel #26.535

Transparent gel of highest viscosity maintains its volume in high peaks and reliefs. It is used as an additive to other products to extend them and increase their transparency and strength. Mixed with colors, pigments, sands and earth texture this gel creates a strong and adherent base for dioramas.
Packaging: In 200 ml. pots (6,75 Fl. Oz.) and 35 ml. (Ref. 26.591).

Textures of Sand, Earth & Stone

A range of acrylic, waterbased textures. They can be mixed with one another, with acrylic colors (Modelcolor, Game Color and Model Air) and other diorama materials. All products are non toxic and dry to a resistant and permanent finish. Drying time depends on the thickness of the applied product and the humidity of the atmosphere, and can vary from 45 minutes to hours or even days.

White Stucco (Gesso) #26.210 This product, also known as Gesso, is a fluid white base of finaly ground white pigment and acrylic resin which can be applied with brush, roller or spatula as a base, or lightly textured before drying to create patterns, and before drying can be textured to give create desired stucco patterns. Packaging: In 200 ml. and 500 ml. pots (6,75 Fl. Oz. / 16.90 Fl. Oz.).	White Stone Paste #26.211 A paste of marble dust and titanium white of high density. The product dries to a thick, stone hard finish which can be carved and sanded. For surface building and extra high reliefs the paste should be applied in layers, allowing each to dry before applying the next. If a more flexible product is required, mix in some Extra Heavy Gel, ref. 26.535. Packaging: In 200 ml. pots (6,75 Fl. Oz.).	Fine White Pumice #26.212 High density paste of fine natural pumice stone and titanium white. For rough textures, oxide effects and the construction of surfaces. For extra high relief the product should be applied in layers, allowing each layer to dry before applying the next. If a more flexible paste is desired, mix with Extra Heavy Gel. Packaging: In 200 ml. pots (6,75 Fl. Oz.).
Rough Grey Pumice #26.213 Rough Grey Pumice is a very heavy paste of natural grey pumice stone. For surface building and the formation of extra high reliefs and peaks. Dries completely opaque. For more flexibility, add some Extra Heavy Gel. Packaging: In 200 ml. pots (6,75 Fl. Oz.).	Sandy paste#26.215 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.) and 35 ml. (#26232).	Desert Sand #26.217 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.).
Red Oxide Earth #26.589 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.) and 35 ml. (#26236).	Brown Earth #26.219 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.).	Dark Earth #26.218 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.).
Dark Lava Earth #26.214 Textures of earth and sand formulated with permanent pigments, microparticles and acrylic resin. This slightly gritty base can be applied with a brush or, painting knife and is perfect for all surfaces and terrains of dioramas. The products can be shaped before drying to achieve low relief textures such as truck and tank tracks, and they can be mixed with all other products of this range. If a less structured surface is required, the textures can be thinned down with water (20% to 40%). Packaging: In 200 ml. pots (6,75 Fl. Oz.).